Sale!

SureCall FlexPro 72db Repeater Kit – Omni/Panel [800/1900mhz]

$580.00 $439.00

Installation notes:

  • In order for your system to function properly, you must maintain  separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 60′ of separation between the outside and inside antennasSeparation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
  • The interior antenna should be at least 10′ away from the amplifier.
  • Make sure the panel antenna is aimed AWAY from the outside antenna.

10 in stock (can be backordered)

SKU: SureCall FlexPro 72db Repeater Kit - Omni/Panel [800/1900mhz] Categories: , , , Tags: ,
Fast Facts about this Product:
  • This repeater kit is best for: Users who need to provide amplified voice and 3G signal to multiple cellular modems or phones in a home or office and have the space to accommodate the 60' of separation between the outside and inside antennas that this kit requires.
  • Coverage area*: up to 6,000 square feet
  • All-in-One Kit? YES
  • Compatibility: 800mhz/1900mhz networks, which are used by most 2G (voice) and 3G networks in the USA, including:
    • Verizon 2G/3G
    • Sprint 2G/3G, plus 4G LTE where Sprint is using the 1900mhz band. This amplifier does NOT support Sprint's 2500mhz LTE band
    • AT&T 2G/3G and HSPA+ (which shows up on your device as "4G" - NOT LTE)
    • T-Mobile and Cricket voice only
    • Contact Us Here

Additional information

Weight2 lbs
Dimensions8 × 1 × 5 in

Specifications

Features & Benefits:

  • FCC Certified for new rigid network protection standards
  • CM400 cable is certified at the optimum length to to ensure maximum performance with minimal loss
  • Built in safeguard completely eliminates interference to the cell tower
  • Approved by all major US carriers
  • Simple Plug and Play operation
  • Independently reconfigurable for each band
  • Dual embedded CPU for smarter technology
  • Eight RSSI detectors for all inputs and outputs
  • Stealth technology incorporated – uplink becomes dormant when not in use, providing green, power saving operation
  • Supports multiple users
  • Auto Gain Control (AGC) and manually adjustable dB gain and attenuation
  • Automatic shut down
  • Supports all 2G and 3G standards
  • Quality metal construction, durable and resilient
  • Lowest Out of Band Emissions (OOBE) to date

Package Includes:

  • 65/72db AG amplifier
  • CM288W 9.5″ omni exterior antenna
  • CM248W interior panel antenna
  • 30ft CM400 cable (N/Male connectors)
  • 75ft CM400 cable (N/Male connectors)
  • AC power supply

Specifications:

  • Frequency Range: Uplink: 824-849/1850-1910 Mhz; Downlink : 869-894/1930-1990Mhz
  • Standards Supported: CDMA, WCDMA, GSM, EDGE, TDMA and AMPS etc.
  • Gain: 65dB Cellullar / 72dB PCS (max 67)
  • Max Output Power: 1 watt EIRP
  • Impedance: 50ohms
  • Noise Figure: Maximum 5 dB
  • VSWR: Less than 2:1
  • AC Input: 5-15V
  • RF Connectors: N Female on both sides
  • Power Consumption: <10W
  • Dimensions: 8″ x 1.25″ x 5″ (amplifier)
  • Weight: 1lbs 8oz (amplifier)
  • FCC ID (USA): RSNFLEXPRO

Reviews

There are no reviews yet.

Be the first to review “SureCall FlexPro 72db Repeater Kit – Omni/Panel [800/1900mhz]”

Your email address will not be published. Required fields are marked *