Cel-Fi GO+ X Smart Signal Booster Kit – Yagi/Dome Antennas

$999.99

Features:

  • Coverage area*: up to 12,500 square feet
  • Includes a yagi outdoor antenna, dome indoor antenna, and 2 x 30′ cables
  • Compatibility: This amplifier can be set to AT&T (3G/4G/LTE), T-Mobile (3G/4G/LTE), or Verizon (LTE only) – you must choose one, it will NOT boost all three at the same time.
    • Verizon users: this amplifier will not help with Verizon 3G, and it will only help with voice/calling if you have HD Voice/VoLTE enabled on your phone and are in an LTE area.
  • 3G / 4G / LTE Voice and Data
  • Superior Performance: 100dB Max Gain
  • Multi-User Mobile Coverage
  • Multi-Carrier Support with Carrier Switching
  • Indoor / Outdoor NEMA 4 Rated
  • Network Safe
  • Cel-Fi WAVE management platform

10 in stock (can be backordered)

SKU: Cel-Fi GO+ X Smart Signal Booster Kit - Yagi/Dome Antennas Categories: , , , Tags: ,

Installation notes:

  • In order for your system to function properly, you must maintain separation between the exterior and interior antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will power down). This amplifier requires up to 100' of separation between the outside and inside antennasSeparation can be horizontal or vertical.
  • If you cannot achieve adequate separation to eliminate oscillation, the gain on the amplifier will automatically adjust, but that will result in a smaller coverage area from the amplifier.
  • Make sure the inside antenna is aimed AWAY from the outside antenna if possible.

Features & Benefits:

  • 3G & 4G / LTE support (WCDMA / HSPA+ / LTE)
  • Supports two (2) bands simultaneously from a single operator
  • Up to 100dB system gain, per band
  • Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and cellular devices
  • Advanced digital echo-cancellation (>30dB) and channel select filtering algorithms
  • Automatic Gain Control (AGC) based on fast real-time echo-cancellation
  • NEMA 4 rated enclosure and connectors
  • Glanceable LED User Interface (UI)
  • Supporting smart phone application (WAVE)
  • Convection cooled cast aluminum chassis
  • Easy mounting capability (mounting screws and anchors included)
  • Systems are pre-configured for a single carrier (network operator)
  • Works with any user equipment (UE) on the configured network (no whitelist/blacklist)
  • System intelligence accurately establishes proper safe uplink power in real time
  • Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected
  • System shuts down upon Operator’s network command or failure detection
  • Nextivity purpose-built, high-performance, six core ASIC processor, provides best performance at lowest cost

Package Includes:

  • Amplifier
  • Power supply
  • Directional yagi antenna
  • Indoor dome antenna
  • 2 x 30' cable
  • Mounting screws and anchors
  • Contact Us Here

Additional information

Weight2 lbs
Dimensions2 × 4 × 11 in

Specifications

Specifications:

  • Compliance:
    • 3GPP TS 25.143 Rel.10
    • 3GPP TS 36.143 Rel.10
    • FCC Part 15, 20, 22, 24, 27
    • Bluetooth BQB
    • CE
  • System Management (Software):
    • Supported by WAVE cloud portal
    • WAVE Portal capability:
      • Status (List and Map)
      • Settings
      • Commissioning
      • Reporting
      • Diagnostics
      • Alarms & Notifications
      • Software Updates
  • Antenna Ports (donor & server):
    • 699 – 2180 Mhz
    • Impedance: 50 Ohm
    • Return Loss: 8 dB
    • Output Protection
    • SMA Female
  • Environmental:
    • Operating temperature: 0° to 65° C
    • Convection Cooling
    • Relative humidity: 0% to 95%, noncondensing
    • WEEE
    • NEMA 4
    • Surface Temp at any point (30° ambient): 53° C
  • Dimensions:
    • 1.71″ x 3.8″ x 10.73″  (43.5mm x 96.5mm x 272.5mm)
    • 1.87lb (850g)
  • Power:
    • 9.6 – 16.5V
    • 2A current draw
    • 16W nominal power consumption
  • Installation:
    • Mounting hardware included
  • DC Power Plug & Jack:
    • NEMA 4 rated power plugs and jack
  • Radio Performance:
    • The GO system can boost up to two (2) bands concurrently. Either profile can be selected:
      • A) One (1) High band boost and one (1) low band boost or
      • B) Two (2) high bands boost
  • Bands Supported:
    • Band 2:
      • Downlink: 1930-1990 MHz
      • Uplink: 1850-1910 MHz
      • MHz: Up to 20MHz contiguous boost, HSPA or LTE
    • Band 4:
      • Downlink: 2110-2155 MHz
      • Uplink: 1710-1755 MHz
      • MHz: Up to 20MHz contiguous boost, HSPA or LTE
    • Band 5:
      • Downlink: 869-894MHz
      • Uplink: 824-849 MHz
      • MHz: Up to 15MHz contiguous boost, HSPA or LTE
    • Band 12:
      • Downlink: 729-746 MHz
      • Uplink: 699-716 MHz
      • MHz: Up to 10MHz contiguous boost, LTE
    • Band 13:
      • Downlink: 746-756 MHz
      • Uplink: 777-787 MHz
      • MHz: Up to 10MHz contiguous boost, LTE

Reviews

There are no reviews yet.

Be the first to review “Cel-Fi GO+ X Smart Signal Booster Kit – Yagi/Dome Antennas”

Your email address will not be published. Required fields are marked *